It-yourself oil changes is a very simple matter. Most people can remember the exact steps in it. You can very easily drive the truck to the fast oil change centers, or in their own homes to do that work. No matter what you decide, but certainly to comply with your car's maintenance manual introduction. If you decide to do the work, taking into account the following simple steps to complete it.
First oil change is a day's work
Step one: running the engine to reach operating temperature. And then use the jack jack up the vehicle, pull up handbrake and use Muxie squeeze onto the front wheel.
Step two: Place the old oil in the sump below the container, the place to find oil sump bolt, and slowly open the oil screw bolts, be careful not to come into contact with hot oil. So that more oil drops for some time. Check the oil discharge bolt, reinstall the oil discharge bolt, be careful not to tighten the bolts tight, to prevent damage to oil pan.
The third step: The Sheng oil containers moved to the bottom of the oil filter, use the oil filter wrench filter unscrewed his hand under its screw. If the filter is still hot, remember that we must wear gloves. Do not worry about filter screw very tight, in the process may damage the filter removed. Filter as long as no damage to the interfaces installed around the screws and filter components on it. After all, we have removed the filter is no longer used.
Step four: refer to user manual choose the right oil filter.
Step five: Apply the new use of the new oil filter gasket interface. If the filter is a vertical installation location, you can pour in some of the new oil filter, so you can start the next time the engine was reduced by dry grinding. Screw into the filter by hand, according to the instructions of the method to tighten the filter (usually in the hand and then tighten the screw the filter into the 3 / 4 laps).
Sixth Step: Next to the new oil into the oil pan, taking into account user manual introduction. You can use the funnel to prevent the oil down in the engine outside. Check whether there are leaks lower the engine. If there is no leak, lay down their vehicles, check the oil feet, and start the engine. After starting the indicator light on the instrument should be immediately extinguished. Finally, turn off the engine check the oil amount of repetition. According to local laws and regulations deal with the old oil and filter.
Oil change DIY - not only to save time and money, but also can help you find the vehicle a number of potential problems (such as fluid leakage).
Oil change DIY - not only learned the vehicle maintenance technology, but also increase the friends affection between family members.
Oil changes are not always very smooth, but usually is very simple.
90 after "witty" MM
Super personality match
Like South Korea's MM Come Maternity
Big love actress inexpensive skin care products used in
The most beautiful bride, how the built
Capture the beauty on the streets with cell phone photo
Sex underwear for your man so infatuated with
This body sculpting underwear you dare to wear?
Reading men's fashion shorts password
Chasing girls, the most effective to send these beautiful phones
Easy to have a supermodel figure
Zhang Ziyi and the Ten-Star Classic Zhuangshan
Sepet the charming actress makeup Cheats
